Mowing the lawn properly is essential for maintaining a healthy and attractive turf.
Start by ensuring that your mower blades are sharp to achieve clean, even cuts that promote healthy grass growth.
Set the mower to the appropriate cutting height, taking into consideration the grass species and current season.
As a general rule, avoid cutting more than one-third of the grass height at a time to prevent stress and scalping.
Mow in a different direction with each mowing session to prevent soil compaction and encourage upright grass growth.
Additionally, keep the mower deck clean and clear of debris to maintain optimal cutting performance.
Finally, remember to mow when the grass is dry to prevent clumping and ensure a clean-cut appearance.
By following these guidelines, you can mow your lawn properly and achieve a well-manicured, vibrant turf.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – How to pick the best mowing height for your lawn

The height at which you mow your lawn depends on several factors, including the grass species, climate, and desired appearance.
Generally, a good rule of thumb is to mow cool-season grasses, such as Fescue, to a height of 30 to 50mm.
Warm-season grasses, like Couch grass can be mowed shorter, typically between 5 to 30mm.
Adjusting the mowing height based on seasonal changes is also important; for example, raising the cutting height during hot summer months can help protect the grass from heat stress and conserve moisture.
Ultimately, maintaining a slightly taller mowing height promotes deeper root growth, improves drought tolerance, and helps prevent weed infestations, resulting in a healthier and more resilient lawn.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – Height of cut Tutorial

LawnPride Blog – How to pick the best mowing height for your lawn

Maintaining your lawn mower is essential to ensure its longevity and reliable performance. Start by regularly cleaning the mower after each use to remove grass clippings, dirt, and debris that can accumulate and cause damage.
Check the oil levels and replace or top up the oil as needed to keep the engine lubricated properly. Inspect the air filter and clean or replace it according to the manufacturer's recommendations to ensure optimal airflow and engine performance.
Sharpen the mower blades regularly to maintain a clean cut and prevent tearing or shredding of the grass leaf.
Check the spark plug and replace it if necessary to ensure efficient ignition and combustion.
Finally, store the lawn mower in a clean, dry, and well-ventilated area such as a garage or shed, and periodically check for any signs of wear or damage that may require repair or replacement.
By following these maintenance steps, you can keep your lawn mower in top condition and enjoy a beautifully maintained lawn for years to come.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – Mower Maintenance Tips

Whether to bag or mulch lawn clippings depends on several factors, including the condition of your lawn, your mowing frequency, and personal preference.
Mulching lawn clippings returns valuable nutrients to the soil as organic matter decomposes, promoting healthier turf growth and reducing the need for fertiliser.
Mulching also helps retain moisture, suppress weeds, and improve soil structure. However, if your lawn is overgrown, or if clippings are excessively long and likely to smother the grass, bagging may be necessary to maintain a tidy appearance.
Bagging also helps prevent clippings from clumping and suffocating the lawn, particularly in wet conditions.
Ultimately, both bagging and mulching have their advantages, so consider factors such as lawn health, aesthetics, and environmental impact when deciding which approach to take.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – To Mulch or Not to Mulch: Understanding the Benefits for your Lawn

Preventing weeds in your lawn requires a proactive approach that combines proper lawn care practices with targeted weed management strategies.
Start by maintaining a healthy and dense turf through regular watering, fertilisation, and mowing at the appropriate height.
A thick, vigorous lawn can outcompete weeds and prevent them from taking root. Implementing cultural practices such as aerating the soil to reduce compaction and promoting proper drainage can also help create unfavourable conditions for weed growth.
Finally, consider applying pre-emergent herbicides at the appropriate times to prevent weed seeds from germinating, and use post-emergent herbicides selectively to target existing weeds without harming the surrounding turf.
By adopting a comprehensive approach to lawn care and weed management, you can effectively prevent weeds and maintain a lush, healthy lawn.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – Rusty Chats: Getting rid of Broadleaf weeds

Product Collection – Pre-Emergent Herbicides

Product Collection – Lawn Herbicides / Weedkillers

Preventing lawn diseases requires a combination of proactive measures aimed at promoting turf health and minimising favourable conditions for fungal pathogens.
Start by maintaining proper lawn care practices, such as mowing at the appropriate height, watering deeply but infrequently in the morning, and avoiding excessive nitrogen fertilisation, which can encourage disease development.
Improve soil drainage and reduce compaction by aerating the lawn regularly to create an environment less conducive to fungal growth. Avoid watering the lawn in the evening or at night, as prolonged moisture on the grass blades can promote disease.
Additionally, practice good sanitation by promptly removing grass clippings, fallen leaves, and other organic debris from the lawn to reduce fungal spore populations.
Selecting disease-resistant grass varieties and rotating fungicides with different modes of action can also help prevent the development of resistant fungal strains.
By implementing these preventive measures, you can minimise the risk of lawn diseases and maintain a healthy, resilient turf.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – Disease Pressures

LawnPride Blog – Lawn Care

Product Collection – Lawn Fungicides

Creating a low-maintenance lawn involves selecting the right grass species, implementing smart design choices, and adopting minimalistic lawn care practices.
Start by choosing a grass variety that is well-suited to your climate, soil type, and sunlight conditions. Opt for low-maintenance grasses such as fine fescue or zoysia grass, which require less mowing, watering, and fertilisation compared to traditional turfgrass species.
Consider reducing the size of your lawn by incorporating landscape beds, mulched areas, or hardscape features to minimize the amount of grass to maintain.
Limit the use of fertilisers and insecticides, opting instead for organic alternatives or integrated pest management practices to promote a healthier, more resilient lawn.
Finally, adjust your mowing frequency and height to match the growth rate of your grass and encourage deeper root growth, which can improve drought tolerance and reduce maintenance needs.
By taking a strategic approach to lawn care and design, you can create a low-maintenance lawn that is both beautiful and sustainable.

For more
information and to explore our available product range, click on the links
below:

LawnPride Blogs – The Green Advantage: Exploring the benefits of a Lawn Care Program

Dealing with thatch buildup in your lawn requires a proactive approach to encourage decomposition and prevent excessive accumulation.
Start by aerating the lawn to improve soil drainage and encourage microbial activity, which helps break down thatch naturally.
Consider dethatching the lawn using a specialised dethatching rake, powered dethatcher, or vertical mower to remove excess thatch and promote airflow and water penetration into the soil. However, be cautious not to dethatch excessively, as this can damage the grass roots and soil structure.
Finally, adopt proper lawn care practices such as mowing at the appropriate height, watering deeply but infrequently, and avoiding excessive fertiliser applications, which can contribute to thatch buildup.
By implementing these strategies, you can effectively manage thatch buildup in your lawn and promote a healthy, resilient turf.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – Identifying, Managing and removing thatch

Storing lawn equipment properly during Winter is essential to protect it from damage and ensure it remains in good working condition for the next season.
Start by thoroughly cleaning each piece of equipment to remove grass clippings, dirt, and debris that can promote rust or corrosion.
As you will be using your equipment less now is a great time to sharpen the blades and have your equipment serviced.
Store lawn equipment in a clean, dry, and well-ventilated area such as a garage or shed, away from moisture.
Finally, periodically check stored equipment throughout the Winter to ensure it remains in good working condition and make any necessary repairs or maintenance before spring.
By taking these steps to properly store your lawn equipment, you can prolong its lifespan and ensure reliable performance when it's time to use it again.

For more information and to explore our available product range, click on the links below:

LawnPride Blog – Mower maintenance tips